Show Tech-Support Password - Cisco XR 12000 Command Reference Manual

show tech-support password

show tech-support password
To automatically run show commands that display information to include the password in the output for
debugging, use the show tech-support password command in EXEC mode.
show tech-support password [file send-to [background] [compressed| uncompressed]] [location node-id]
[terminal [page]]
Syntax Description
file
send-to
background
compressed
uncompressed
terminal
page
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
238
Specifies that the command output is saved to a specified file.
Name of the file. The following valid options are listed:
• filename
• bootflash: filename
• disk0: filename
• disk0a: filename
• disk1: filename
• disk1a: filename
• ftp: filename
• harddisk: filename
• harddiska: filename
• harddiskb: filename
• nvram: filename
• rcp: filename
• tftp: filename
(Optional) Specifies that the command runs in the background.
(Optional) Displays compressed command output.
(Optional) Displays the command output with no compression.
Specifies that the command output is displayed on the terminal.
(Optional) Specifies that the command output is displayed one page at a time.
Use the return key to display the next line of output or use the space bar to display
the next page of information. If not used, the output scrolls (that is, it does not
stop for page breaks).
Press the Ctrl+C keys to stop the command output.
Tech-Support Commands
OL-28456-02