Cisco XR 12000 Command Reference Manual page 114

show controllers fabricq frfab
Command History
Release
Release 3.2
Release 3.6.0
Usage Guidelines
Use the show controllers fabricq frfabcommand to display from fabric statistics. Specifying a location
displays information only if that location is an RP. Use the detail keyword to display detailed output.
The show controllers fabricq frfabcommand is typically used for debugging purposes.
Note
Task ID
Task ID
root-system
Examples The following is sample output from the show controllers fabricq frfabcommand for location 0/1/CPU0:
RP/0/0/CPU0:router# admin
RP/0/0/CPU0:router(admin)# show controllers fabricq frfab location 0/1/CPU0
Location 0/1/0:
From Fabric Stats:
-------------------
Slot
1
2
3
4
5
From Fabric Packet per Queue Stats:
-----------------------------------
Packets received in queue 0 - 0
Packets received in queue 1 - 3928
Packets received in queue 2 - 150069
Packets received in queue 3 - 8290
From Fabric Error Stats:
------------------------
Bigger than MTU pkts
Corrupted pkts
SPD pkt count
No IDB drops
IDB queue tail drops
Chan corrupted pkts
First/Last err pkts
Sequence err pkts
Unknown Rx type
Output queue 0 full drops
Output queue 1 full drops
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
106
Rx-pkts Rx-TH-pkts Rx-dropped
0 3928 0
0 37309 0
0 43306 0
0 42681 0
0 35063 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
Modification
This command was introduced.
The trace keyword and options argument were added.
Operations
read, write
Fabric Management Commands
OL-28456-02