Show Captured Packets - Cisco XR 12000 Command Reference Manual

Troubleshooting Commands

show captured packets

To display information on packets that are switched and punted in the software, use the show captured
packets command in EXEC mode.
show captured packets {ingress| egress} [interface type interface-path-id] [hexdump] [last number]
[single-line] location node-id
Syntax Description
ingress
egress
interface
type
interface-path-id
hexdump
last number
single-line
location node-id
Command Default
No default behavior or values
Command Modes
EXEC
Command History
Release
Release 3.2
OL-28456-02
Specifies ingress dropped packets.
Specifies egress dropped packets.
(Optional) Specifies an interface.
Interface type. For more information, use the question mark (?) online help
function.
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces
Note
currently configured on the router.
For more information about the syntax for the router, use the question mark (
? ) online help function.
(Optional) Displays the packet contents in hex.
(Optional) Specifies the last number of packets in the queue to display.
(Optional) Displays a one-line summary of the captured packets to facilitate
the use of the include and exclude operators.
Displays packet information for a specified node. The node-id argument is
entered in the rack/slot/module notation.
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
Modification
This command was introduced.
show captured packets
39