Show Uidb Index - Cisco XR 12000 Command Reference Manual

Troubleshooting Commands

show uidb index

To display micro-interface descriptor block (IDB) index information, use the show uidb index command in
EXEC mode.
show uidb index [interface-type interface-instance] location node-id
Syntax Description
interface-type
interface-instance
location node-id
Command Default
No default behavior or values
Command Modes
EXEC
Command History
Release
Release 3.2
OL-28456-02
(Optional) Interface type. For more information, use the question mark (?) online help
function.
Either a physical interface instance or a virtual interface instance as follows:
• Physical interface instance. Naming notation is rack/slot/module/port and a slash
between values is required as part of the notation.
◦ rack: Chassis number of the rack.
◦ slot: Physical slot number of the modular services card or line card.
◦ module: Module number. A physical layer interface module (PLIM) is always
0.
◦ port: Physical port number of the interface.
In references to a Management Ethernet interface located on a route
Note
processor card, the physical slot number is alphanumeric (RP0 or RP1)
and the module is CPU0. Example: interface MgmtEth0/RP1/CPU0/0.
• Virtual interface instance. Number range varies depending on interface type.
For more information about the syntax for the router, use the question mark (?) online
help function.
Displays UIDB index information for a specified node. The node-id argument is entered
in the rack/slot/module notation.
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
Modification
This command was introduced.
show uidb index
85