Show Tech-Support Snmp - Cisco XR 12000 Command Reference Manual

Tech-Support Commands

show tech-support snmp

To automatically run show commands that display information specific to tech-support information related
to Simple Network Management Protocol (SNMP) agent, use the show tech-support snmp command in
EXEC mode.
show tech-support snmp [entitymib| ifmib] [rack] [location node-id| all] file send-to
Syntax Description
entitymib
ifmib
rack
file
send-to
locationnode-id
OL-28456-02
(Optional) Displays the entitymib debugging information.
(Optional) Displays the ifmib debugging information.
(Optional) Displays the list of racks.
Specifies that the command output is saved to a specified file.
Name of the file. The following valid options are listed:
• filename
• bootflash: filename
• compactflash: filename
• disk0: filename
• disk0a: filename
• disk1: filename
• disk1a: filename
• flash: filename
• ftp: filename
• harddisk: filename
• harddiska: filename
• harddiskb: filename
• nvram: filename
• rcp: filename
• slot0: filename
• slot1: filename
• tftp: filename
(Optional) Specifies a node. The node-id argument is entered in the
rack/slot/module notation.
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
show tech-support snmp
289