Cisco XR 12000 Command Reference Manual page 133

Tech-Support Commands
Table 25: show system verify Field Descriptions
Field
Type
Initial
Current
Application
Available
Physical
nodes
blocked processes
aborted processes
crashed processes
LC Status on Router
QNET Status on router
GSP Fabric Status on router
GSP Ethernet Status on router
POS Interface Status on router
Protocol
IP address
Encapsulation
MTU
Keep alive
Packets Input
Bytes Input
Packets Output
OL-28456-02
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
Description
Type of memory
Initial usage determined when the command is run
with the start keyword
Current usage
Memory used for applications
Memory available for applications
Total physical memory
Devices in the system such as linecards, route
processors, fabric cards, and so forth
Number of blocked processes on the router
Number of aborted processes on the router
Number of crashed processes on the router
Linecard status
Internal communications protocol status
Internal communications protocol status
Internal communications protocol status
Packet-over-SONET status
Protocol on the interface
IP Address of the interface
Encapsulation method used on the interface
Maximum Transmission Units for the interface
Keep alives messages on the interface
Total number packets input to the interface
Total number of bytes input to the interface
Total number of packets output by the interface
show system verify
125