Show Watchdog - Cisco XR 12000 Command Reference Manual

show watchdog

show watchdog
To display information about the memory state or threshold memory, use the show watchdog command in
EXEC mode.
show watchdog [memory-state| threshold memory configured] [location node-id]
Syntax Description
memory-state
threshold memory
configured
location node-id
Command Default
The command output is not compressed.
Command Modes
EXEC
Command History
Release
Release 3.2
Usage Guidelines
Use the show watchdog command to display information about the memory states or thresholds for a
specified location. You can display the default or configured memory thresholds.
Task ID
Task ID
basic-services
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
346
(Optional) Displays the memory
state.
(Optional) Displays the memory
thresholds.
Displays the configured memory
thresholds.
(Optional) Specifies a node. The
node-id argument is entered in the
rack/slot/module notation.
The location node-id keyword and
argument must be specified if the
threshold memory keywords are
selected.
Modification
This command was introduced.
Operations
read
Watchdog Commands
OL-28456-02