Cisco XR 12000 Command Reference Manual page 281

Tech-Support Commands
compressed
uncompressed
Command Default
The command output is not compressed.
Command Modes
EXEC
Command History
Release
Release 3.3.0
Usage Guidelines
This command generates tech-support information that is useful for Cisco Technical Support representatives
when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a
file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command
to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz
tftp://server_path.
For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service
Request' section in the Preface.
This command can generate a very large amount of output. You may want to redirect the output to a file
Tip
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
Use the show tech-support routing ospfv3 command to run show commands that display information
specific to OSPFv3 debugging. This command generates OSPFv3 debugging information that can be useful
for Cisco Technical Support representatives when troubleshooting a router.
This command is not required during normal use of the router.
Note
The following show commands run automatically when you run the show tech-support routing ospfv3
command:
• show version
• show run router ospfv3
• show route ipv6 ospf
• show ospfv3
• show ospfv3 interface
• show ospfv3 virtual-links
OL-28456-02
(Optional) Displays compressed command output.
(Optional) Displays the command output with no compression.
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
show tech-support routing ospfv3
Modification
This command was introduced.
273