Cisco XR 12000 Command Reference Manual page 174

show tech-support dsc
compressed
uncompressed
Command Default
The command output is not compressed.
Command Modes
Administration EXEC
Command History
Release
Release 3.4.0
Usage Guidelines
This command can generate a very large amount of output. You may want to redirect the output to a file
Tip
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
Use the show tech-support dsc command to run show commands that display information specific to DSC
debugging. This command generates DSC information that can be useful for Cisco Technical Support
representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service
Request' section on page iii in the Preface for Cisco Technical Support contact information.
This command is not required during normal use of the router.
Note
The following show commands run automatically when you run the show tech-support dsc command:
• show dsc all
See the Cisco IOS XR software command references for information about these commands and descriptions
of their command output. The Cisco IOS XR software command references are located at the following URL:
http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html
Task ID
Task ID
admin
Examples The following example shows some of the show tech-support dsc command output:
RP/0/0/CPU0:router(admin)#show tech-support dsc terminal page
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
166
(Optional) Displays compressed command output.
(Optional) Displays the command output with no compression.
Modification
This command was introduced.
Operations
read
Tech-Support Commands
OL-28456-02