Cisco XR 12000 Command Reference Manual page 143

Tech-Support Commands
Alarm reporting enabled for: SLOS SLOF SF_BER PLOP
Alert reporting enabled for: B1-TCA B2-TCA B3-TCA
Framing: SONET
SPE Scrambling: Enabled
C2 State: Stable
S1S0(tx): 0x0
PATH TRACE BUFFER : UNSTABLE
Remote hostname :
Remote interface:
Remote IP addr
APS
No APS Group Configured
Protect
Rx(K1/K2) : 0x00/0x00
Tx(K1/K2) : 0x00/0x00
Remote Rx(K1/K2):
BER thresholds:
TCA thresholds:
Optics type: None
Clock source: internal (actual) line (configured)
Rx S1: 0xe
Optical Power Monitoring (accuracy: +/- 1dB)
Not Supported
Port SONET0/6/0/3:
Status: Up
Loopback: None
SECTION
LOF = 0
LINE
AIS = 0
PATH
AIS = 0
LOP = 0
PLM = 0
Line delays trigger:
Path delays trigger:
Last clearing of "show controllers SONET" counters never
Detected Alarms: None
Asserted Alarms: None
Mask for Detected->Asserted: None
Detected Alerts: None
Reported Alerts: None
Mask for Detected->Reported: None
Alarm reporting enabled for: SLOS SLOF SF_BER PLOP
Alert reporting enabled for: B1-TCA B2-TCA B3-TCA
Framing: SONET
SPE Scrambling: Enabled
C2 State: Stable
S1S0(tx): 0x0
PATH TRACE BUFFER : STABLE
Remote hostname : PE21_C12406
Remote interface: POS0/2/0/3
Remote IP addr
APS
No APS Group Configured
Protect
Rx(K1/K2) : 0x00/0x00
OL-28456-02
C2_rx = 0x6D (109)
S1S0(rx): 0x2 / Framing Derived
:
Channel 0 DISABLED
1/ Remote Tx(K1/K2):
SF = 10e-3 SD = 10e-6
B1 = 10e-6 B2 = 10e-6
Tx S1: 0xf
LOS = 0
RDI = 0
RDI = 0
NEWPTR = 0
TIM = 0
0 ms clear:
0 ms,
C2_rx = 0x16 (22)
S1S0(rx): 0x0 / Framing Derived
: 10.121.4.21
Channel 0 DISABLED
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
C2_tx = 0x16 (22) / Scrambling Derived
1/
B3 = 10e-6
BIP(B1) = 0
FEBE = 0 BIP(B2) = 0
FEBE = 0 BIP(B3) = 0
PSE = 0 NSE
UNEQ = 0
10000 ms
0 ms (configured), clear:
C2_tx = 0x16 (22) / Scrambling Derived
show tech-support aps
= 0
10000 ms
135