Cisco XR 12000 Command Reference Manual page 11

ASIC Driver Commands
Examples
The following example shows sample output from the show controllers plim asic egress-channel bay
command:
RP/0/0/CPU0:router# show controllers plim asic egress-channel bay 0 channel 0 location
0/4/CPU0
Host bay 0 Tx SPI4.2 channel 0 :
=============================================
Ifname
SPI4.2 Channel state
Bay number
Tx SPI4.2 channel number
Internal Buffer number
SPI4.2 calendar entries
Buffer Almost Full Threshold
Tx Queuing ASIC port number
This table describes the significant fields shown in the display.
Table 2: show controllers plim asic egress-channel bay Field Descriptions
Field
Ifname
SPI4.2 Channel state
Bay number
Tx SPI4.2 channel number
Internal Buffer number
SPI4.2 calendar entries
Buffer Almost Full Threshold
Tx Queuing ASIC port number
1 System Packet Level Interface 4.2
OL-28456-02
: DATA_PORT_0
: provisioned
: 0
: 0
: 0
: 1
: 0x2c00
: 0
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
show controllers plim asic egress-channel bay
Description
Identifies the primary transmit interface.
1
Indicates if the SPI4.2 channel is provisioned.
Identifies the bay that hosts the specified SPI4.2
transmit channel. Can be 0 or 1.
Identifies the SPI4.2 channel whose information is
displayed.
Identifies the internal buffer associated with the
SPI4.2 transmit channel.
Number of entries in the SPI4.2 calendar.
An increment counter which indicates that the
transmit buffer is almost full. The "Buffer Almost
Full Threshold" is expressed in hexadecimal format.
Identifies the SPI4.2 transmit port.
3