Cisco XR 12000 Command Reference Manual page 91

Troubleshooting Commands
location all
location mgmt-nodes
Command Default
No default behavior or values
Command Modes
EXEC
Command History
Release
Release 3.2
Release 3.5.0
Usage Guidelines
Task ID
Task ID
cisco-support
Examples The following example shows the sample output from the show uidb trace command:
RP/0/0/CPU0:router sh uidb trace init loc 0/6/CPU0
--------------------------------------------------------------------------
28 wrapping entries (512 possible, 0 filtered, 28 total)
Mar 31 02:27:35.368 uidb_svr/initlog 0/6/CPU0 t1
Mar 31 02:27:36.641 uidb_svr/initlog 0/6/CPU0 t1
Mar 31 02:27:36.641 uidb_svr/initlog 0/6/CPU0 t1
Mar 31 02:27:36.816 uidb_svr/initlog 0/6/CPU0 t1
Mar 31 02:27:36.816 uidb_svr/initlog 0/6/CPU0 t1
Mar 31 02:27:51.695 uidb_svr/initlog 0/6/CPU0 t1
Mar 31 02:27:51.695 uidb_svr/initlog 0/6/CPU0 t1
Mar 31 02:27:51.803 uidb_svr/initlog 0/6/CPU0 t1
Mar 31 02:27:51.803 uidb_svr/initlog 0/6/CPU0 t1
Mar 31 02:27:51.828 uidb_svr/initlog 0/6/CPU0 t1
Mar 31 02:27:51.828 uidb_svr/initlog 0/6/CPU0 t1
Mar 31 02:27:51.922 uidb_svr/initlog 0/6/CPU0 t1
Mar 31 02:27:51.922 uidb_svr/initlog 0/6/CPU0 t1
Mar 31 02:27:51.944 uidb_svr/initlog 0/6/CPU0 t1
Mar 31 02:27:51.944 uidb_svr/initlog 0/6/CPU0 t1
Mar 31 02:27:51.944 uidb_svr/initlog 0/6/CPU0 t1
Mar 31 02:27:51.944 uidb_svr/initlog 0/6/CPU0 t1
Mar 31 02:27:51.951 uidb_svr/initlog 0/6/CPU0 t1
Mar 31 02:27:51.951 uidb_svr/initlog 0/6/CPU0 t1
Mar 31 02:27:51.951 uidb_svr/initlog 0/6/CPU0 t1
Mar 31 02:27:51.951 uidb_svr/initlog 0/6/CPU0 t1
Mar 31 02:27:51.951 uidb_svr/initlog 0/6/CPU0 t1 Successful : Checkpoint egrese
OL-28456-02
(Optional) Specifies all locations.
(Optional) Specifies all management nodes.
Modification
This command was introduced.
Index and operation modes were not supported.
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
Operations
read
Entering : Event manager init
Successful : Event manager int
Entering : Debug init
Successful : Debug init
Entering : MIPC bund
Successful : MIPC bind
PSE RSM : Init - main() : (50s
Successful : PSE RSM Init sucd
Entering : Metro bind
Successful : Metro bind
Entering : PLIM ASIC register
Successful : PLIM ASIC registr
Entering : UIDB checkpoint int
Successful : UIDB checkpoint t
Entering : UIDB shadow memoryt
Successful : UIDB shadow memot
Entering : UIDB EDM init
Successful : UIDB EDM init
Entering : Checkpoint ingresse
Successful : Checkpoint ingree
Entering : Checkpoint egress e
show uidb trace
83