Cisco XR 12000 Command Reference Manual page 290

show tech-support sanitized
location
node-id
all
rack
Command Modes
EXEC
Command History
Release
Release 3.2
Usage Guidelines
Tip This command can generate a very large amount of output. You may want to redirect the output to a file
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
This command generates sanitized configuration output for debugging information that can be useful for Cisco
Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting
a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.
This command is not required during normal use of the router.
Note
See the Cisco IOS XR software command references for information about these commands and descriptions
of their command output. The Cisco IOS XR software command references are located at the following URL:
http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html
Task ID
Task ID
basic-services
Examples The following example shows some of the show tech-support sanitized command output that is displayed
on the terminal:
RP/0/0/CPU0:router# show tech-support sanitized terminal page
-------------------------------------------------------------------------------
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
282
(Optional) Specifies a node.
(Optional). Node ID. The node-id argument is entered in the rack/slot/module
notation.
(Optional) Specifies all locations.
(Optional) Displays the list of racks.
Modification
This command was introduced.
Tech-Support Commands
Operations
read
OL-28456-02