Show Controllers Pse - Cisco XR 12000 Command Reference Manual

ASIC Driver Commands

show controllers pse

To display packet switching engine (PSE) information in the egress or the ingress stage, use the show
controllers pse egress command in EXEC mode.
show controllers pse {egress| ingress} {gather| precam| statistics}
Syntax Description
gather
precam
statistics
Command Default
No default behavior or values
Command Modes
EXEC
Administrator EXEC
Command History
Release
Release 4.0.0
Usage Guidelines
Task ID
Task ID
interface
drivers
Examples The following command shows how to use the show controllers pse command:
RP/0/0/CPU0:router# show controllers pse egress gather
OL-28456-02
Displays gather stage programming information.
Displays precam stage programming information.
Displays microcode statistics.
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
Modification
This command was introduced.
Operations
read
read
show controllers pse
21