Show Tech-Support Netflow - Cisco XR 12000 Command Reference Manual

show tech-support netflow

show tech-support netflow
To automatically run show commands that display information specific to netflow debugging, use the show
tech-support netflow command in EXEC mode.
show tech-support netflow [file send-to [background] [compressed| uncompressed]] [location node-id]
[rack]
Syntax Description
file
send-to
background
compressed
uncompressed
location node-id
rack
Command Modes
EXEC
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
234
Specifies that the command output is saved to a specified file.
Name of the file. The following valid options are listed:
• filename
• bootflash: filename
• disk0: filename
• disk0a: filename
• disk1: filename
• disk1a: filename
• ftp: filename
• harddisk: filename
• harddiska: filename
• harddiskb: filename
• nvram: filename
• rcp: filename
• tftp: filename
(Optional) Specifies that the command runs in the background.
(Optional) Displays compressed command output.
(Optional) Displays the command output with no compression.
(Optional) Specifies a node. The node-id argument is entered in the
rack/slot/module notation.
(Optional) Displays the list of racks.
Tech-Support Commands
OL-28456-02