Show Controllers Plim Asic Summary - Cisco XR 12000 Command Reference Manual

show controllers plim asic summary

show controllers plim asic summary
To display summarized physical layer interface module (PLIM) ASIC information for a specific node or
interface, use the show controllers plim asic command in EXEC mode.
show controllers plim asic summary [location node-id]
Syntax Description
location node-id
Command Default
No default behavior or values
Command Modes
EXEC
Command History
Release
Release 3.2
Usage Guidelines
Task ID
Task ID
interface
root-system
Examples The following example shows how to display summarized PLIM ASIC information for all locations:
RP/0/0/CPU0:router# show controllers plim asic summary
Node: 0/1/CPU0
--------------------------------------
Instance# 0
--------------------------------------
Name
Port 0
Jacket slot: 1
Port 1
Jacket slot: 3
Port 2
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
18
Identifies the location of the node whose PLIM ASIC information you want to display.
The node-id argument is expressed in the rack/slot/module notation.
Use the show platform command to see the location of all nodes installed
Note
in the router.
Summary info:
: PLASPA Version : 2
SPA type : SPA_NAME_UNKNOWN
SPA type : SPA_NAME_UNKNOWN
Modification
This command was introduced.
Operations
read
read
ASIC Driver Commands
OL-28456-02