Watchdog Commands
show critmon trace lib-error
To display information about the trace data for the library error for the critical monitor, use the show critmon
trace lib-error command in EXEC mode and in administration EXEC mode.
show critmon trace lib-error [file filename original] [hexdump] [last entries] [reverse] [stats] [tailf]
[unique] [verbose] [wrapping] [location {node-id| all}]
Syntax Description
file
filename
original
hexdump
last
entries
reverse
stats
tailf
unique
verbose
wrapping
location node-id
location all
Command Default
No default behavior or values
Command Modes
EXEC
Administration EXEC
OL-28456-02
(Optional) Displays a specific file.
Name of a specific file.
Specifies the original location of the file.
(Optional) Displays traces in hexadecimal format.
(Optional) Displays the last numbered entries.
Number of entries. The range is from 1 to 4294967295.
(Optional) Displays the latest traces first.
(Optional) Displays the statistics.
(Optional) Displays the new traces as they are added.
(Optional) Displays the unique entries with counts.
(Optional) Displays the information for internal debugging.
(Optional) Displays the wrapping entries in the command output.
(Optional) Specifies a node. The node-id argument is entered in the
rack/slot/module notation.
Specifies all locations.
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
show critmon trace lib-error
329