Cisco XR 12000 Command Reference Manual page 165

Tech-Support Commands
page
Command Modes
EXEC
Command History
Release
Release 3.2
Usage Guidelines
This command generates tech-support information that is useful for Cisco Technical Support representatives
when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a
file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command
to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz
tftp://server_path.
For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service
Request' section in the Preface.
This command can generate a very large amount of output. You may want to redirect the output to a file
Tip
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
Use the show tech-support cfgmgr command to gather information about the configuration manager. This
command is used to locate any issues in regards to executing configuration commands or problems.
See the Cisco IOS XR Software command references for information about these commands and descriptions
of their command output. The Cisco IOS XR Software command references are located at the following URL:
http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html
Task ID
Task ID
cisco-support
OL-28456-02
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
(Optional) Specifies that the command output
is displayed one page at a time. Use the return
key to display the next line of output or use the
space bar to display the next page of
information. If not used, the output scrolls (that
is, it does not stop for page breaks).
Press the Ctrl+C keys to stop the command
output.
Modification
This command was introduced.
Operations
read
show tech-support cfgmgr
157