Cisco XR 12000 Command Reference Manual page 171

Tech-Support Commands
show tech-support control-ethernet
Examples
The following example shows a truncated version of the show tech-support control-ethernet command
output:
RP/0/0/CPU0:router(admin)#show tech-support control-ethernet terminal page
Number of nodes 13
Gathering required commands for show tech control-ethernet
Finding available nodes in the system
Node - 0/1/CPU0
Node - 0/1/SP
Node - 0/4/CPU0
Node - 0/4/CPU1
Node - 0/4/SP
Node - 0/6/CPU0
Node - 0/6/SP
Node - 0/
0
/CPU0
Node - 0/
0
/CPU0
Node - 0/SM0/SP
Node - 0/SM1/SP
Node - 0/SM2/SP
Node - 0/SM3/SP
-------------------------------------------------------------------------------
show tech-support control-ethernet
-------------------------------------------------------------------------------
------------------- show version ---------------------------------
Cisco IOS XR Software, Version 3.9.0.20I[DT_IMAGE]
Copyright (c) 2009 by Cisco Systems, Inc.
ROM: System Bootstrap, Version 1.51(20080807:092259) [CRS-1 ROMMON],
P2_CRS-8 uptime is 1 day, 18 hours, 10 minutes
System image file is "bootflash:disk0/hfr-os-mbi-3.8.0.20I/mbihfr-rp.vm"
cisco CRS-8/S (7457) processor with 4194304K bytes of memory.
7457 processor at 1197Mhz, Revision 1.2
4 Management Ethernet
16 GigabitEthernet
20 SONET/SDH
20 Packet over SONET/SDH
1019k bytes of non-volatile configuration memory.
1000592k bytes of disk0: (Sector size 512 bytes).
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
OL-28456-02 163