Cisco XR 12000 Command Reference Manual page 252

show tech-support placement
Command Modes
EXEC
Command History
Release
Release 3.2
Usage Guidelines
This command can generate a very large amount of output. You may want to redirect the output to a file
Tip
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
This command generates process placement debugging information that can be useful for Cisco Technical
Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a
Service Request' section on page iii in the Preface for Cisco Technical Support contact information.
Note This command is not required during normal use of the router.
See the Cisco IOS XR software command references for information about these commands and descriptions
of their command output. The Cisco IOS XR software command references are located at the following URL:
http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html
Task ID
Task ID
cisco-support
sysmgr
Examples
The following example shows some of the show tech-support placement command output that is displayed
on the terminal:
RP/0/0/CPU0:router# show tech-support placement terminal page
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
------------------------------- run lrd_show -I -------------------------------
Success: node_count=6, ready=1
node=0x11, type=2, memsize=256, cpus=1, speed=100, sw_state=6, red_state=0, lr_0
node=0x41, type=1, memsize=256, cpus=1, speed=100, sw_state=6, red_state=1, lr_f
node=0x42, type=1, memsize=256, cpus=1, speed=100, sw_state=6, red_state=1, lr_f
node=0x61, type=2, memsize=256, cpus=1, speed=100, sw_state=6, red_state=0, lr_0
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
244
Modification
This command was introduced.
Operations
read
read
show tech-support placement
Tech-Support Commands
OL-28456-02