Cisco XR 12000 Command Reference Manual page 202

show tech-support l2tp
Command Modes
EXEC
Command History
Release
Release 3.2
Usage Guidelines
This command can generate a very large amount of output. You may want to redirect the output to a file
Tip
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
This command collects relevant data for Layer 2 tunneling protocol-related issues that can be useful for Cisco
Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting
a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.
Note This command is not required during normal use of the router.
See the Cisco IOS XR Software command references for information about these commands and descriptions
of their command output. The Cisco IOS XR Software command references are located at the following URL:
http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html
Task ID
Task ID
cisco-support
Examples The following example shows some of the show tech-support l2tp command output that is displayed on
the terminal:
RP/0/0/CPU0:router# show tech-support l2tp terminal page
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
-------------------------- show l2tp session detail ---------------------------
--------------------------- show l2tp tunnel detail ---------------------------
----------------------------- show l2tp internal ------------------------------
L2TP Internal information:
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
194
show tech-support l2tp (Detailed output with event traces)
Modification
This command was introduced.
Operations
read
Tech-Support Commands
OL-28456-02