Show Tech-Support Pfi - Cisco XR 12000 Command Reference Manual

show tech-support pfi

show tech-support pfi
To automatically run show commands that display information specific to Packet Forwarding Infrastructure
(PFI) debugging for all components, use the show tech-support pfi command in EXEC mode.
show tech-support pfi {file send-to [background| compressed| uncompressed]| terminal [page]| trace-only}
[location {node-id| all}]
Syntax Description
file
send-to
background
compressed
uncompressed
terminal
page
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
240
Specifies that the command output is saved to a specified file.
Name of the file. The following valid options are listed:
• filename
• bootflash: filename
• disk0: filename
• disk0a: filename
• disk1: filename
• disk1a: filename
• ftp: filename
• harddisk: filename
• harddiska: filename
• harddiskb: filename
• nvram: filename
• rcp: filename
• tftp: filename
(Optional) Specifies that the command runs in the background.
(Optional) Displays compressed command output.
(Optional) Displays the command output with no compression.
Specifies that the command output is displayed on the terminal.
(Optional) Specifies that the command output is displayed one page at a time.
Use the return key to display the next line of output or use the space bar to display
the next page of information. If not used, the output scrolls (that is, it does not
stop for page breaks).
Press the Ctrl+C keys to stop the command output.
Tech-Support Commands
OL-28456-02