Admit Patient; New Case - GE Medical Systems Dash 2000 Operator's Manual

Admit Patient

Admit Patient

New Case

3-12
Depending on how your monitor is set up, you will see either ADMIT
PATIENT or NEW CASE.
This menu option is a direct action menu option which admits the patient
to the monitor. Simply select the key to admit the patient.
This menu option is found only when the monitor is set for Operating Room
mode and Standard or Rover admit menu.
It is a direct action menu option which, when selected, does both a
discharge and immediate admit.
All patient data from the previous patient is erased, the screen blanks for a
few seconds, and then the monitor is ready for the next patient.
Dash 2000 Patient Monitor
2005873-001
Revision C