Table of Contents
Advertisement
Troubleshooting
Messages
13-6
If you experience some problems with temperature monitoring, one of the
following messages may be displayed in the TP parameter window:
CHECK
There is a 0.1 o C deviation between the temperature value and the
internal calibration. No temperature value will be displayed. Service
on the monitor is required.
CAL FAIL
There is a 1 o C deviation between the temperature value sensed and
the internal calibration. No temperature value will be displayed.
Service on the monitor is required.
SENSOR
The temperature sensor has failed.
Dash 2000 Patient Monitor
2005873-001
Revision C
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Dash 2000 and is the answer not in the manual?
Questions and answers