Rover Combo Admit Menu - GE Medical Systems Dash 2000 Operator's Manual

Rover Combo Admit Menu

3-8
With this application you are combining the Rover and the Combo
applications into one. The monitor may be on a cart which allows you to
move it from one room to another and ECG data can be obtained from the
monitor or from a telemetry transmitter.
NOTE: A room must have network cable in order to use telemetry.
MAIN
MENU
PREV.
MENU
ICU Admit Menu—Rover Combo Application
NOTE: XXX=ADMIT if patient is discharged, DISCHARG otherwise.
NOTE: It is not likely that this application is used when the monitor is set
for Operating Room mode. However, the admit menu would look
just like this one.
ECG SOURCE—choose either the monitor or a telemetry transmitter from
which to receive the patient's parameter data.
ADMIT INFO—opens the admit information window and popup menu;
refer to section Admit Info later in this chapter.
ADMIT PATIENT–a direct action menu option that admits the patient.
DISCHARG PATIENT—opens a popup menu to confirm the discharge of
the patient.
SET UNIT NAME—verify or change the unit name. The correct unit name
is essential for recognition at a central station and other network devices.
SET BED NUMBER—verify or change the assigned bed number.
correct bed number is essential for recognition at a central station and
other network devices.
SET GRAPH LOCATION—display a new menu to select writers for manual
and alarm graphs.
Refer to this chapter, Admit Menu Options, if you need more details on
these menu options.
Dash 2000 Patient Monitor
2005873-001
ECG
ADMIT
XXX
SOURCE:
INFO
PATIENT
MONITOR
SET SET SET
UNIT BED GRAPH
NAME NUMBER LOCATION
030
The
Revision C