Factory Defaults-Adult-Icu Mode - GE Medical Systems Dash 2000 Operator's Manual

Factory Defaults—Adult-ICU Mode
Following are the factory-set monitor defaults for the Adult-ICU Mode. You can change these using the
Monitor Defaults feature. Monitor defaults are recalled upon discharge. Refer to the Monitor Setup chapter.
Arrhythmia Alarm Levels
Crisis Warning
Asystole
VFib/VTac
V Tach
Revision C
Advisory Message
Dash 2000 Patient Monitor
2005873-001
Parameter Alarm Levels
Crisis Warning
HR
PA
ART
NBP
SPO2
FEM
UAC
CVP
RA
UVC
LA
ICP
SP
ART Rate
RR
Resp
Apnea
SPO2 Rate
TP
FEM Rate
UAC Rate
Advisory Message
14-11