Set Bed Number - GE Medical Systems Dash 2000 Operator's Manual

Set Bed Number

3-14
This menu option is found in Rover and Rover Combo admit menus.
Another essential element to recognize the monitor on the network is the
bed number. Look to the right of the unit name on the display. The bed
number assigned to this monitor is displayed.
Bed number appears here
21-NOV-1998 16:27
II
Location of Bed Number on the Monitor
Follow this procedure to confirm that the bed number is correct:
1. Select SET BED NUMBER from the Admit Menu. A popup menu and
information window are displayed.
21-NOV-2000 16:27
II
CONFIRM BED NUMBER:
>
CREATE NEW BED
BED1
BED2
BED3
BED4
BED5
BED6
MAIN
MENU
PREV.
MENU
SET BED NUMBER Popup Menu and Information Window
2. Use the Trim Knob control to move the pointer in front of the correct
bed number.
3. If the bed number you need is not listed, select CREATE NEW BED. A
text entry popup menu opens which works just like that for setting
patient name.
NOTE: If the monitor is not on the network, a text entry popup menu will
open.
Dash 2000 Patient Monitor
2005873-001
DAK.BED 1
150/
ECG
60
105/
SPO2
98
DAK.BED 1
SET SET
UNIT BED
XXXX
NAME NUMBER
50
90
038
039
Revision C