Factory Defaults-Operating Room Mode - GE Medical Systems Dash 2000 Operator's Manual

Factory Defaults—Operating Room Mode
Following are the factory-set monitor defaults for the Operating Room Mode. You can change these using
the Monitor Defaults feature. Monitor defaults are recalled upon discharge. Refer to the Monitor Setup
chapter.
Arrhythmia Alarm Levels
Crisis Warning
Asystole
VFib/VTac
V Tach
Revision C
Advisory Message
Dash 2000 Patient Monitor
2005873-001
Parameter Alarm Levels
Crisis Warning
HR
NBP
ART
PA
CVP
SPO2
FEM
UAC
RA
UVC
LA
ICP
SP
ART Rate
TP
SPO2 Rate
FEM Rate
UAC Rate
RR
Resp
Apnea
Advisory Message
14-19