Probe Off Patient Condition - GE Medical Systems Dash 2000 Operator's Manual

Probe Off Patient Condition

Revision C
When using a reusable finger probe, there is a system alarm to alert you when
the probe is off the patient. The monitor defaults this "probe off patient"
condition as a System Warning alarm. You can, however, set it as a System
Advisory alarm in Monitor Defaults. Refer to Setup Default Display section in
Chapter 5, Monitor Setup. It is identified as SPO2 PROBE OFF in the Setup
Default Display information window.
Dash 2000 Patient Monitor
2005873-001
11-13