Monitor Setup Menu
5-2
Whenever possible, we want you to be able to customize your monitor to
best suit your unit's and patients' needs. The Monitor Setup menu allows
you to make changes and, in some cases, to save these changes as monitor
defaults to be recalled each time you discharge a patient.
Follow this procedure to access the Monitor Setup Menu:
1. Select MORE MENUS from the Main Menu.
2. Select MONITOR SETUP to display the Monitor Setup Menu.
MAIN
MENU
PREV.
MENU
•
MONITOR DEFAULTS—configure alarms, set alarm limits, and
establish display defaults to be recalled whenever a discharge is
performed.
•
DISPLAY SETUP selects the DISPLAY SETUP menu for the following
adjustments:
•
WAVEFORM ON / OFF—reassign waveform positions on the screen
or turn some waveforms off.
•
COLOR—choose a color configuration if you have a color monitor.
•
BACKGRND—switch from background white to black (monochrome
option).
•
CONTRAST—control how bright the display is.
•
GRAPH SETUP—select waveforms to be graphed, graph speed, and
where a graph will be printed.
•
PARAM. ON / OFF—clear unneeded parameter windows from the
display and turn them back on again when needed.
•
SOFTWARE SUMMARY—display a list of the software revisions
currently installed for the various components of the monitor.
•
SERVICE MODE—access a service mode (for qualified service
personnel).
Detailed information on each option is found in this chapter.
Dash 2000 Patient Monitor
2005873-001
MONITOR
DISPLAY
DEFAULTS
SETUP
PARAM.
SOFTWARE
SERVICE
ON / OFF
SUMMARY
MONITOR SETUP Menu
GRAPH
SETUP
MODE
050
Revision C
Need help?
Do you have a question about the Dash 2000 and is the answer not in the manual?