Huawei IAD108A User Manual page 245

User Manual
U-SYS IAD108 Integrated Access Device
Table 7-17 Parameters of commands
Item
alarmthreshold
delay
jitter
lost
timer
Example:
Set the RTCP alarm thresholds as follows:
IAD2000(config)#rtcp_para alarmthreshold 2 lost 10 delay
100 jitter 100 timer 10
IAD2000(config)#
Query the current RTCP threshold settings:
IAD2000(config)#show rtcp_para
lost rate of RTP channel
delay of RTP channel
Threshold of alarm RTCP packet, that is, an alarm is
generated after the parameters delay, jitter and lost of how
many RTCP packets in a row exceed the thresholds. The
value range is 0 to 5, and the default value is one packet. If it is
set to 0, it means no alarm is generated regardless of the
network status; that is, the alarm and log function of RTCP is
disabled.
RRound-trip delay of the RTP channel. The value range is 50
to 1,000 milliseconds.
Delay jitter of the RTP channel. The value range is 10 to 200
milliseconds.
Packet loss ratio of the RTP channel. The value range is
0%–20%.
The time interval between sending RTCP packets. The value
range is 0 to 60 seconds.
Chapter 7 Maintaining System
Description
:10%
:100ms
7-57