Huawei IAD108A User Manual page 120

User Manual
U-SYS IAD108 Integrated Access Device
2) Delete the port 3 user, and set the priority of the newly
added port 3 user to the highest level.
IAD2000(config)#mguser del 3
Are you sure to delete the port data? (Y|N)y
IAD2000(config)#mguser add 3 priority 0
{ <cr>|terminalid<K>|telno<K>|mgtelno<K>|leaveword<K>
}:
Command:
Subscriber data are being generated. Please wait...
Command executed. Data of 1 users added successfully!
3) Query the newly added port 3 user.
IAD2000(config)#show mguser 3
------------------------------------------------------
-
Port MGID TerminalID Priority LWDflag Telno MGtelno
------------------------------------------------------
-
3
-
------------------------------------------------------
-
IAD2000(config)#
mguser add 3 priority 0
0 3
Chapter 4 Configuring Data
High
4-44
No -