Huawei IAD108A User Manual page 153

User Manual
U-SYS IAD108 Integrated Access Device
I.
Parameter Description
Table 5-9 lists the parameters in the commands and their
meanings.
Table 5-9 Parameter descriptions
Item
interface-num,
interface-num1
interface-num8
duplex-mode
speed-value
vlan-id
II.
Examples
Example:
Set port 1 as work in full-duplex mode.
IAD2000(lanswitch)#duplex full 1
IAD2000(lanswitch)#
Set the rate of port 2 as auto negotiation, and the rate of port 3 as
100 Mbit/s.
IAD2000(lanswitch)#negotiation-auto 2
IAD2000(lanswitch)#speed 10 3
IAD2000(lanswitch)#
LAN Switch port number of the IAD108, ranging 1–5. For
–
the commands with a "*", its value ranges 1–6.
The duplex mode of the LAN Switch port, being half or full.
The two values represent the half duplex mode and full
duplex mode respectively.
The baud rate at the LAN Switch port, being 10 or 100.
The two values represent 10 Mbit/s and 100 Mbit/s
respectively.
VLAN ID, ranging 0–4095.
Description
5-16
Chapter 5 Advanced
Configuration