Huawei IAD108A User Manual page 68

User Manual
U-SYS IAD108 Integrated Access Device
R. Return to upper menu
Enter your choice(1-9 or R):9
============================================
Down load file by xmodem_crc protocol....
When the above prompt appears on the terminal, select
[Transfer/Send File] in the HyperTerminal window, then select the file
to be loaded, set the transmission protocol as Xmodem, and click
<Send>.
When IAD108 and HyperTerminal are correctly connected, and
the file transmission starts, the transmission progress will be shown
on HyperTerminal.
When the loading succeeds, the following prompt will appear
and the system will return to the menu interface of selecting loading
file.
Down load file by xmodem_crc protocol end
===========================================
Download file successful.
Check file CRC value... done.
Copy file (voice resource) to flash(0x10300000),please
wait...... Done.
Save file end.
The file of you download check successful, and copy to
flash ok!
=======================
FILE SELECT SUBMENU
Chapter 3 Loading Software
3-26
CCCCCC