Huawei IAD108A User Manual page 150

User Manual
U-SYS IAD108 Integrated Access Device
vlan priority
--------------------------------------------------
IAD2000(config)#tag vlanid 0 priority 3
Change the VLAN tag configuration will interrupt current
convesations, conitnue?[Y|N]:y
Command executing, please wait...
--------------------------------------------------
vlan tag function is enable
vlan id
vlan priority
--------------------------------------------------
IAD2000(config)#
Note:
When the VLAN tag is used to separate voice and data packets, it must be ensured
that the upper network equipment (a router or a LAN Switch) also supports VLAN tag.
When the VLAN tag function is enabled, the current calls will be affected.
Example:
Set ToS (Type of Service) of the voice packets to the highest
reliability, and that of the other packets to the lowest cost.
IAD2000(config)#tos voice priority reliability
Command executing, please wait...
--------------------------------------------------
TOS of voice packets:
TOS of other packets:
--------------------------------------------------
: 7
: 0
: 3
Maxmize reliability
Normal service
5-13
Chapter 5 Advanced
Configuration