Huawei IAD108A User Manual page 188

User Manual
U-SYS IAD108 Integrated Access Device
7) Confirm the modification. Otherwise, the configuration will
be lost after restart. Proceed as follows.
IAD2000(diagnose)%%adsl commit
{ <cr>|command<S><1,63> }:
Command:
IAD2000(diagnose)%%
The data configuration of the ADSL subboard connecting the
DSLAM in the bridging mode is completed.
For the network access of the user PC, configure the PPP
account and password of the PC on the BAS equipment,
and install the PPP software for dialing on the PC.
For the network access of the IAD108, configure the PPP
account and password of the IAD108 on the BAS equipment,
and configure the PPP account and password on the
IAD108.
Note:
If you are not familiar with the above command lines of the ADSL subboard, or need to
configure more parameters, add "help" at the end of command words for help.
adsl commit
6-22
Chapter 6 ADSL Service
Configuration