User Manual
U-SYS IAD108 Integrated Access Device
III.
Usage example
Example:
Set the equipment EID of IAD108 as "cn108.com".
IAD2000(config)#eid cn108.com
IAD2000(config)#
Add an IADMS with the IP address as 210.11.123.33:
IAD2000(config)#iadms 1 ip 210.11.123.33 get set trap 162
IAD2000(config)#
Register to IADMS while booting
Table 4-9 Other related command
Operation
Set whether the IAD registers to
IADMS when it starts.
Display the IADMS information.
Delete the IADMS
configuration.
To set the IAD108 to register to IADMS at startup, operate as
follows:
IAD2000(config)#iadms 1 register enable
IAD2000(config)#
To query the IADMS configuration information, operate as
follows:
IAD2000(config)#show iadms
Chapter 4 Configuring Data
Command
IAD2000(config)#iadms iadms-num register
{ enable | disable }
IAD2000>show iadms
IAD2000>show iadms
4-31