Huawei IAD108A User Manual page 200

User Manual
U-SYS IAD108 Integrated Access Device
portid: Number of the port, of which the service is to be
terminated. The value ranges from 0 to 7.
II.
SPC Service
The start or termination of Semi-Permanent Connection (SPC)
service is actually the linking or releasing of the SPC. After you have
released an SPC, the relevant configuration data is not removed.
You can establish the SPC again when necessary.
Table 7-4 Related commands
Operation
Release an SPC
Recover an SPC
The parameters of the commands are listed in Table 7-5.
Table 7-5 Parameters of the commands related to SPC services
Item
connectid
fromid
endid
IAD2000(config)#spc release { connectid connectid |
from-connectid fromid [ to-connectid endid ] }
IAD2000(config)# no spc release { connectid connectid|
from-connectid fromid [ to-connectid endid ] }
Index of SPC, ranging 0–7.
Index of the start SPC, ranging 0–7.
Index of the end SPC, ranging 0–7.
7-12
Chapter 7 Maintaining System
Command
Description