Huawei IAD108A User Manual page 227

User Manual
U-SYS IAD108 Integrated Access Device
Note:
This command is used to change the control switch for exporting log host
information, which exists on the log host. When modifying, you can focus on a
certain information type, or on multiple types.
When executing this command, you must activate the related log host.
Example: Set the output control switches on log host "log2" as:
only that for the (diagnose) terminal information type is set to "off",
others are set to "on".
IAD2000(config)#infoswitch syslog log2 alarm on debug on
diagnose off oprlog on other on stat on syslog on trace
on
IAD2000(config)#
II.
Parameter Descriptions
The main parameters are listed in Table 7-9.
Table 7-9 Parameter descriptions
Item
ip
hostname
syslog
oprlog
debug
IP address of log host
Name of log host
System log (info type)
Operation log (info type)
Debugging (info type)
7-39
Chapter 7 Maintaining System
Description