Huawei IAD108A User Manual page 82

User Manual
U-SYS IAD108 Integrated Access Device
Time out when registering to IADMS 1
Searching
initializing...
Nothing modified.
When the device has been started successfully, the following
interface will pop up to prompt you to input user name and password.
By default, IAD108 has a super manager, whose user name is "root"
and password is "admin". Note that the password is case sensitive,
while the user name is not. Here, take the super manager as an
example, enter the user name "root" and password "admin" (it is not
displayed on the screen). The following prompt will appear.
User name (<=15 chars):root
User password (<=15 chars):
IAD2000>
When the prompt "IAD2000>" appears on the screen, it means
that you have logged into the system successfully.
After logging into the system for the first time, you must modify
the login password of the super manager. The command user
password in privilege mode is used to modify the password. Note
that the password is case-sensitive and the maximum length is 15
characters.
Caution:
If the super manager "root" forgets the password, contact the technical support
engineer of Huawei.
modification
Chapter 4 Configuring Data
on system config
4-6
data while