User Manual
U-SYS IAD108 Integrated Access Device
Selecting "1", you will enter serial port loading menu. Selecting
"2", you will enter network interface loading menu. Selecting "R", you
can return the upper level menu.
6)
Select to load through serial port or network interface. In
the following part, 1 and 2 are parallel, and you can only
choose one to enter step 7.
In the above menu, select "1" to enter serial port loading
menu:
=======================
SERIAL
=======================
1. Download file to Flash through serial interface
2. Show serial parameter
3. Set
R. Return to file download submenu
Enter your choice(1-3 or R):
Selecting 2 indicates to show the serial port parameter.
Selecting 3 indicates to set the serial port parameter, (here only the
baud rate can be modified). Selecting R means to return to the upper
level menu.
In the upper level menu, select 2 to enter the network
interface loading submenu.
=======================
FTP
=======================
1. Download file to Flash through ethernet interface
SUBMENU
serial parameter
SUBMENU
Chapter 3 Loading Software
3-21