Huawei IAD108A User Manual page 143

User Manual
U-SYS IAD108 Integrated Access Device
Example:
Set the send and receive gain at port 0 of slot 1 to low gain.
IAD2000(config)#pstnport attribute set 7 9 disable reverse
{ <cr>|V21TimerLen<K> }:
Command:
Data configuration succeeded!
IAD2000(config)#
III.
Related Commands
Table 5-3 listed the related commands.
Table 5-3 Related commands
Operation
Set the attributes of PSTN
port
Batch set the attributes of
PSTN port
Display the attributes of
PSTN port
IV.
Parameter Description
Table 5-4 lists all the parameters in the commands and their
meanings.
pstnport attribute set 7 9 disable reverse
IAD2000(config)#pstnport attribute set portid
[ voicegain pulse-dial pole ]
IAD2000(config)#pstnport
startuser portid
pulse-dial pole ]
IAD2000>show pstnport attribute [ portid ]
5-6
Chapter 5 Advanced
Configuration
Command
attribute
enduser portid [ voicegain
batset