Huawei IAD108A User Manual page 249

User Manual
U-SYS IAD108 Integrated Access Device
Parameter
-q Except statistics, other detailed information is not displayed.
-s Sets the length of ECHO_REQUEST message.
Sets the time-out time of waiting for the response of
-t
ECHO_REQUEST message.
Displays the received non ECHO_RESPONSE ICMP messages. It
-v
is not displayed by default.
Example:
IAD2000(config)#ping -c 10 10.72.54.100
PING 10.72.54.100: 56 data bytes, press CTRL_C to break
Reply from 10.72.54.100: bytes=56 Sequence=0 ttl=119
time = 0 ms
Reply from 10.72.54.100: bytes=56 Sequence=1 ttl=119
time = 0 ms
Reply from 10.72.54.100: bytes=56 Sequence=2 ttl=119
time = 0 ms
Reply from 10.72.54.100: bytes=56 Sequence=3 ttl=119
time = 0 ms
Reply from 10.72.54.100: bytes=56 Sequence=4 ttl=119
time = 0 ms
Reply from 10.72.54.100: bytes=56 Sequence=5 ttl=119
time = 0 ms
Reply from 10.72.54.100: bytes=56 Sequence=6 ttl=119
time = 0 ms
Reply from 10.72.54.100: bytes=56 Sequence=7 ttl=119
time = 0 ms
Chapter 7 Maintaining System
Meaning of parameter
7-61