Huawei IAD108A User Manual page 74

User Manual
U-SYS IAD108 Integrated Access Device
ftp server login username : iad
ftp server login password : 108
ftp
C:\WINDOWS\Desktop\IAD108V2R2
Note:
In the above command, "IAD108" is a legal user name in the FTP server, the
password is "passwd", and the path of the file to be loaded is "C:\IAD108
B01D030". Such settings must be consistent with those set in FTP Serv-U.
To use FTP for loading, first execute command ftpserver. After that, carry out
command write to save the configurations in command ftpserver to the device.
After that, when the device is loaded through FTP in next rebooting, the
command ftpserver needs not be carried out.
Format of command ftpserver: ftpserver username password [dirname]. In this
command, username and password are the name and password used to log in
to the FTP server, and dirname is the directory name of FTP server. This
command is used in global config mode.
5) On the maintenance terminal, enter command load packet
to load the package file. During the loading, you can use
command show
progress.
IAD2000(config)#load packet ftp 172.21.50.51 iad_packet
Load(backup) begins. This process will take several
minutes. If it is interrupted unproperly, it will fail.
Please wait and check the result.
Besides, you can use command 'show progress load' to
server
progress load to check the loading
3-32
Chapter 3 Loading Software
directory name :