Huawei IAD108A User Manual page 99

User Manual
U-SYS IAD108 Integrated Access Device
default gateway: 172.21.200.250
MAC address
PPPoE disable
vlan tag function is disable
vlan id
vlan priority
DHCP function is enable
TOS of voice packets:
TOS of other packets:
--------------------------------------------------
IAD2000(config)#
4) The result shows that the DHCP function has been started,
and the IP address "172.21.50.79" is obtained from the
DHCP server.
III.
Configuring IAD108 to Obtain IP Address Through
PPPoE Dialup
IAD108 supports PPPoE dialup mode. It can obtain IP address
from the DNS server during the PPPoE dialup process and perform
DNS resolution.
Configuration for PPPoE can be made in two steps:
1) Configure user name and password
2) Enable PPPoE
If PPPoE dialup fails, the system will automatically dial up again.
The commands are listed in Table 4-8.
: 00-E0-FC-1E-24-88
: 0
: 3
Maxmize reliability
Normal service
4-23
Chapter 4 Configuring Data