Huawei IAD108A User Manual page 252

User Manual
U-SYS IAD108 Integrated Access Device
Maintenance terminal 1 Maintenance terminal 1
Server Server
Figure 7-1 Networking for case 1
II.
Fault Phenomenon
Sometimes the maintenance terminal 1 can be connected to
IAD108 through Telnet, and sometimes it cannot. The maintenance
terminal 2 can be normally connected to IAD108 through Telnet.
III.
Processing Procedure
Connect the maintenance terminal 2 to IAD108 through Telnet.
Execute Ping command to check whether the link between IAD108
and the maintenance terminal 1 is normal.
1) Adopt the default parameter value of ping command to
ping the maintenance terminal 1.
IAD2000(config)#ping 172.21.50.51
LAN LAN
Chapter 7 Maintaining System
Workstation Workstation
7-64
IAD IAD
Maintenance terminal 2 Maintenance terminal 2