Huawei IAD108A User Manual page 66

User Manual
U-SYS IAD108 Integrated Access Device
In the above menu, item 9 is very special: When BIOS selects 9
in the menu to load packet file, it will take all the files out of the packet
(packet file consists of iad_voice and ida_dsp) to update the
corresponding files in the Flash memory. So it is flexible. Loading
and upgrading of a single file can be completed through other menu
items.
8) Select the file and loading it.
According to the selection in step 6, the loading can be
implemented through network interface and serial port. The following
part describes these two modes.
If you select network interface loading in step 6:
If the FTP server is correctly configured and the uplink interface
of IAD108 can ping through FTP server, you can do it.
For the configuration of FTP server, refer to section 3.2.2 .
If you select serial port loading in step 6:
When the above items are selected, you must transmit the
corresponding files through the HyperTerminal within the default time
allowed by the system.
Chapter 3 Loading Software
3-24