Huawei IAD108A User Manual page 90

User Manual
U-SYS IAD108 Integrated Access Device
Note:
The configuration tasks are arranged from the very beginning of your configuration
procedures.
Table 4-5 Task list of configuring equipment data
Serial No.
Configure data of
1
this device
Configure IP
2 address of IAD108
(mandatory)
Set the system time
3
of IAD108
Operation
Chapter 4 Configuring Data
Command
banner incoming hostname phone
Configure fixed IP address:
ip address ip-address net-mask gateway-ip
Configure the system to obtain IP address
automatically:
dhcp enable
Configure PPPoE to obtain IP address
automatically:
pppoe username usermane password
password
pppoe { disable | enable }
Set the system time of IAD108 to be
synchronous with SNTP server:
sntp server {address server-ip | name
server-name}
sntp time-zone sign value
sntp interval interval-seconds
4-14