Huawei IAD108A User Manual page 80

User Manual
U-SYS IAD108 Integrated Access Device
Ltd.
******************************************************
*******************
BIOS version:
Creation date:
auto-booting...
Attaching network interface lo0... done.
Attached TCP/IP interface to cpm0.
setting basic net para... done.
Please press CTRL+B to enter bootmenu,other key to boot!
remain 0s
According to the prompt, you can press any key to go to the next
step, or wait for 5 seconds and the system will automatically enter
the next step. You can press <CTRL+B> to enter the BIOS interface
to operate. Refer to section 3.2.1 in Chapter 3.
Begin to check program area in flash... done..
Copy program from area(1) to ram!
Expand
ram ......................................
......................................................
.
......................................................
.
......................................................
Chapter 4 Configuring Data
506
Jul 12 2004, 10:16:22
file
4-4
to