Huawei IAD108A User Manual page 194

User Manual
U-SYS IAD108 Integrated Access Device
The management and maintenance terminals of IAD108
include: command line terminal, Network Management Station
(NMS), Web-based NMS and Log host.
Information generated on the IAD108 is not sent to the various
terminals directly. Instead, it is first sent to the IAD108 information
center. This information center controls the output of information to
the various terminals, like which type of information, and what level
of the information, should a terminal receive.
I.
Setting Information Output Switch
By setting the information output switch, you can control the
type of information to be outputted to a certain terminal.
1) Related commands
Table 7-1 Related commands
Set the information output switch for
command line
Set the information output switch for NMS
Set the information output switch for Log host
Set the information output switch for
Web-based NMS
Show the information output switch for the
command line
Show the information output switch for the
NMS
Operation
Chapter 7 Maintaining System
IAD2000(config)#infoswitch cli
IAD2000(config)#infoswitch
nms
IAD2000(config)#infoswitch
syslog
IAD2000(config)#infoswitch
www
IAD2000>show infoswitch cli
IAD2000>show infoswitch nms
7-6
Command